Skip to main content
Booster Docs

Service Start/Stop

Use the App​

  1. On the control page, tap "Settings" to enter the settings page.

    image.png

  2. On the settings page, tap "Restart Robot" to restart the robot.

    image.png

Using a Terminal​

  1. Connect to the robot from another device via a terminal
  2. On the robot itself, run the following in any directory:
⚠️

Note: restarting the robot service fully reboots the robot firmware. Make sure the robot is properly placed on a stand or lying flat on the ground before running this.

# Source once per login
source /opt/booster/env/activate
# Start the robot service
bdb container boot-all
# Stop the robot service
bdb container kill-all
# Restart the robot service
bdb container kill-all && bdb container boot-all